Page 2
Misuse may result in electric shock or fire. To prevent your TV To get the most out of your new VIZIO product, read these instructions exposed to rain or moisture, does not operate normally, or has from being damaged, the following instructions should be observed for before using your product and retain them for future reference.
Page 3
constitute a risk of electric shock to persons. • To reduce risk of electric shock, do not touch the connector with • Many injuries, particularly to children, can be avoided by taking wet hands. simple precautions such as: • Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
Page 4
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides Ground Clamp information with regard to proper grounding of the mast and supporting...
Page 5
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, and TruSurround are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. c DTS, Inc. All Rights Reserved. Manufactured under license from Dolby Laboratories.
Table Of Contents Getting to Know Your TV ..........7 Setting the Timer ................23 Using the Info Window ...............33 Setting the Auto Power Off Feature ..........23 Playing USB Media ............34 Front Panel ..................7 Setting Up Channels ................24 Rear Panel ...................8 Displaying USB Media .................34 Scanning for Channels ..............24 Connecting your devices ..............9 Removing the USB Drive from the TV ..........34...
Getting to Know Your TV FRONT PANEL Remote Sensor and Power Indicator When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off.
Rear Panel HDMI - Connect an HDMI device. Video/ L/R Component/Composite - Connect a component or composite. Y/Pb/Pr Coaxial - Connect to a coaxial cable from cable, satellite, or antenna. Stereo Audio Out - Connect 3.5mm audio device, such as a headset or sound bar. USB - Connect a USB thumb drive to play photo.
Connecting Your Devices CONNECTING A DEVICE - AUDIO & VIDEO CABLE TYPES Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.). Connect the appropriate cable (not included) to the TV and the device.
Page 10
CONNECTING A DEVICE D24hn-G9 includes a Component In/ AV In port that requires additional adapters (not included). Connect the appropriate cable (not included) to the TV and the device using an adapter (not included). 2. Turn the TV and your device on. Set the TV’s input to match the connection you used (Component or Composite).
Page 11
CONNECTING A DEVICE - AUDIO CABLE TYPES Your TV can be output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has audio port that matches an available port on the TV (Optical, RCA, etc). Connect the appropriate cable (not included) to the TV and the device.
TV, ask someone to help you. Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model. D24hn-G9 Screw Size: Hole Depth: 8.5 mm...
For more 16. Number Pad - Manually enter a channel information please visit: www.vizio.com/environment 17. Enter - Confirm channel entered using the number pad. WARNING: keep the remote control batteries away from 18.
Completing The First-Time Setup The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use: Before you begin the first-time setup: • Your TV should be installed and the power cord should be connected to an electrical outlet. TV SIGNAL SELECT A LANGUAGE Select how you watch TV.
Using the On-Screen Menu CHANGING THE INPUT SOURCE Your TV features an easy-to-use on-screen menu. NAVIGATING THE ON-SCREEN MENU To open the on-screen menu, press the Menu button on the remote. INPUT External devices such as DVD players, Blu-ray Players, and video game To open the on-screen menu: consoles can be connected to your TV.
CHANGING THE SCREEN ASPECT RATIO Normal The TV can display images in four different modes: Normal, Panoramic, Wide, and Zoom. Each mode displays the picture differently. Stretch Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape.
ADJUSTING THE PICTURE SETTINGS 4. To manually change each of the picture settings, use the Up/ Adjusting More Picture Settings Down Arrow buttons on the remote to highlight that picture To adjust more picture settings: setting, then use the Left/Right Arrow buttons to adjust the Your TV can be adjusted to suit your preferences and viewing conditions.
Adjusting the Color Temperature Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Adjusting the color temperature changes the white balance of the Picture Mode Edit Settings allow you to make precise adjustments to the Custom picture modes allow you to save a group of custom settings for picture.
Locking/Unlocking a Custom Picture Mode Deleting a Custom Picture Mode Custom picture modes can be locked/unlocked with a unique PIN to Custom picture modes that are no longer needed can be deleted. prevent accidental changes to their settings. To lock all custom picture modes: Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode.
Adjusting the Color Tuner Settings To turn color channels off and on: To show or hide the SMPTE Test Pattern: The Color Tuner settings allow you to adjust the HSB color and 11 point 1. From the COLOR CALIBRATION menu, use the Arrow buttons to 1.
Page 21
To show or hide the Ramp Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to highlight Calibration Tests, and then press the Left/Right Arrow buttons until the RAMP TEST PATTERN menu is displayed. Ramp Test Pattern 2.
ADJUSTING THE AUDIO SETTINGS • Analog Audio Out - Sets the volume control properties for the RCA connector when connected to a home theater audio system. Select Variable if you are controlling the volume with the TV’s To adjust the audio settings: volume controls, or select Fixed if an external audio device 1.
SETTING TIMERS Setting the Auto Power Off Feature To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. Setting the Timer When activated, the TV’s timer will turn the TV off after a set period of To set the Auto Power Off feature: time.
SETTING UP CHANNELS Scanning for Channels Skipping Channels The TV may need to scan for channels before it can display programs After a channel scan is completed, you may find that some channels are You can use the TV’s Channels menu to: and their associated information.
LISTENING TO ALTERNATE AUDIO To use the Digital Language feature: 1. From the CHANNELS menu, highlight Digital Audio and press Changing the Analog Audio Language Digital Audio OK. The DIGITAL LANGUAGE Back Some analog over-the-air (free) and cable channels broadcast programs menu is displayed.
USING PARENTAL CONTROLS Enabling or Disabling Program Ratings Blocking and Unblocking Content by Rating To manage program content according to its rating, you must enable the A channel may sometimes broadcast programs that are meant for The TV’s parental controls allow you to prevent the TV from displaying Program Rating feature.
SETTING UP CLOSED CAPTIONING Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference. Your TV can display closed captions for programs that include them. See the diagram on the next page for an explanation of the parts of the Closed captions display a transcription of a program’s dialogue.
Page 28
Typical choices include: Text Background • Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode. • Opaque background and window in the same color—When text appears, the entire line fills with color at once.
RENAMING DEVICES ON THE INPUT MENU You can rename the inputs to make them easier to recognize on the Input Name Input menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” See Changing the Input Source.
CHANGING THE TV SETTINGS Viewing System Information Changing the On-Screen Menu Language To view technical data and status information about your TV: Your TV can display the on-screen menu in Using the SYSTEM menu, you can: different languages. 1. Press the Menu button on the remote. The on-screen menu is •...
TV’s time zone: HDMI (ARC) input with the included remote, without any programming. new VIZIO TV offers several accessibility features that can help you get Using CEC, your VIZIO TV remote can control: the most out of it.
USING THE RESET & ADMIN MENU Restoring the TV to Factory Default Settings Setting a System PIN All of the on-screen menu settings can be reset to the factory defaults. You can set a System Pin to lock content and picture modes as well as You can use the TV’s RESET &...
USING THE INFO WINDOW The Info Window can be displayed by pressing the Info button on the remote: • Press the Info button one time to display the current input, time and picture mode Current Input Time Picture Mode HDMI-1 5:00 pm Wide INFO WINDOW...
Playing USB Media Displaying USB Media The USB Media Player allows you to connect a USB thumb drive to your TV and play photos. To display your USB media: 1. Connect your USB thumb drive to the USB port on the side of the 2.
Troubleshooting & Technical Support Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available You can also contact our...
Page 36
Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. REGISTER YOUR VIZIO PRODUCT NOW...
Page 37
Ensure you are only pressing one button at a time. • Please visit https://www.vizio.com/accessibility, Email us at: • Point the remote directly at the TV when pressing a button. Accessibility@vizio.com, or give us a call at 1-877-698-4746. • Replace the remote batteries with new ones. See Replacing the Batteries.
Specifications D24hn-G9 Size 24” Viewable Area 23.5” MOUNTING 21.83” x 14.78” x 6.18” Dimensions w/ Stand (554.5 x 375.5 x 157.0mm) 21.83” x 13.15” x 2.06” Dimensions w/o Stand (554.5 x 334.1 x 52.4mm) Weight w/ Stand 6.17 lbs (2.80 kg) Weight w/o Stand 5.95 lbs (2.70 kg)
Regulatory Information FCC Class B Radio Interference Statement Notice CPC-2-1-28 d’Industrie Canada, License optionnelle pour les appareils NOTE: This equipment has been tested and found to comply with the The changes or modifications not expressly approved by the party radio de faible puissance, pour plus de détails. limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, degree of protection. VIZIO Technical Support will provide instructions VIZIO, and if you are a resident of the United States, you must submit WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A for packing and shipping the product to the VIZIO service center.
Page 41
Arbitration Act, and may be entered in any court having jurisdiction. TO YOU. Except as may be required by law, neither you nor VIZIO nor an arbitrator IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND may disclose the existence, content, or results of any arbitration under DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING this warranty without the prior written consent of you and VIZIO.
Need help?
Do you have a question about the D24hn-G9 and is the answer not in the manual?
Questions and answers