Selecting A Waypoint - Lowrance GlobalMap 540c BAJA Operation Instructions Manual

Selecting a Waypoint

To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. A highlighted
halo will appear around the waypoint.
Create Waypoint by Entering a Position
1. Press |→ to
WPT
2. Press ↓ to
E
3. Press → to
change the first character, then press → to the next character and re-
peat until the latitude is correct. Press
New Waypoint screen (left). Edit Waypoint menu with Latitude high-
4. Press ↓ to
change the first character, then press → to the next character and repeat
until the longitude is correct. Press
altitude, depth or symbol, proceed to Step 5. If you want to see the way-
point on the map, press
press . If you select Go to Waypoint, a route will be automatically be
ENT
created directing you to the new waypoint. If you choose Find on Map,
the map screen will appear with the cursor crosshairss centered on the
waypoint you created.
5. You can edit the waypoint's Name, Altitude or Depth by highlighting
the desired category and pressing
character, then press → to the next character and repeat until the de-
sired name, altitude or depth has been entered. Press
6. To edit the waypoint's symbol, highlight
. The Icon Window will appear with 63 symbols. Select the desired
ENT
symbol and press
7. Press , which will open the Waypoint Information menu with up
EXIT
to four options: Go To Waypoint, Find on Map, Edit Waypoint and De-
lete Waypoint. Select the desired option and press
S
UBCATEGORY
P
NTERED OSITION
|
L ENT
ATITUDE
|
L ENT
ONGITUDE
EXIT
.
ENT
column|↓ to
| |→ to
ENT C
REATE
. Enter the latitude by pressing ↑ or ↓ to
ENT
lighted (right).
. Enter the longitude by pressing ↑ ↓ to
. To edit the waypoint's name,
ENT
, select
G T
O
. Use ↑ ↓ to change the first
ENT
73
| .
N ENT
EW
| .
ENT
.
or
W
O AYPOINT
ENT.
C S
HOOSE YMBOL
.
ENT
and
F M
IND ON AP
and press