Table of Contents
Advertisement
Tank Size
The Tank Size menu allows you to input the size of a selected tank in
gallons. After selecting the desired tank from the Tank Select menu,
you are ready to enter the tank's size.
Set Configuration button
The Set Configuration button is used to finalize engine-tank configura-
tion settings.
Setting Engine-Tank Configuration:
1. Press
MENU| MENU
2. The NMEA 2000 menu will appear with five options: Bus Setup,
Fuel Management, NMEA 2000 Alarms, Waypoint Sharing and Back-
light Synchronization. Choose
3. Select
E
NGINE
& Tank Configuration menu with the following configuration options: 1
Engine/1 Tank, 1 Engine/2 Tanks, 2 Engines/1 Tank, 2 Engines/2
Tanks, 3 Engines/1 Tank, 3 Engine/3 Tanks and Unconfigured Bus.
1 Engine/1Tank highlighted on Engine and Tank Configuration
menu (left). Starboard highlighted on Tank Select menu (center).
4. Choose the configuration that matches the number of engines and
tanks on your vessel and press
5. Highlight
T
ANK
menu.
6. Select the tank you want to set up and press
light the Tank Size dialog box and press
7. Use ↓ ↑, ← → to input the capacity (gallons) of the tank you chose
from the Tank Select menu and press
8. Repeat Steps 5-7 for each remaining tank.
www.Busse-Yachtshop.de
, use ↓ ↑ to highlight
and press
& T
C
ANK
ONFIG
Tank Size set to 40 gallons (right).
and press
S
ELECT
NMEA 2000
and press
B
S
US
ETUP
, which will open the Engine
ENT
.
ENT
, which will open the Tank Select
ENT
.
ENT
.
ENT
128
email: info@busse-yachtshop.de
and press
ENT
.
ENT
. Press → to high-
ENT
.
Advertisement
Table of Contents
