Ignition Switch; Choke Control; Hour Meter - Husqvarna MZ5424SR CA Operator's Manual

Ignition Switch

The ignition switch is placed on the control panel and
is used to start and stop the engine.
Turn the key clockwise to start the engine.

Choke Control

The choke control is used for cold starts in to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled out to its
extent. Push the choke in once the engine starts.

Hour Meter

The hour meter displays the total operating time with
the blade activated.
The display on the hour meter will turn on the oil can
icon after every fifty hours of use and will stay on
for two hours or until the meter is manually reset. To
manually reset the timer, turn the ignition key to the
run position. Engage and disengage the blade switch
five times at one second intervals.
CONTROLS
Ignition switch
Choke control
Hour meter
8058-145
8058-145
8058-145
21