Samsung SID-42CN Instruction Manual

About this manual
Before installing and using the camera, please read this manual carefully. Be sure to keep it handy
for later reference.
SALES NETWORK
• SAMSUNG TECHWIN CO., LTD. • SAMSUNG OPTO-ELECTRONICS AMERICA,
INC. (SOA)
Optics & Digital Imaging Division 145-3,
Sangdaewon 1-Dong, Jungwon-Gu, Sungnam, Closed Circuit Division 40 Seaview Drive,
Kyungki-Do, Korea 462-703 Secaucus N.J 07094, U.S.A
TEL: 82-31-740-8137~41 FAX: 82-31-740-8145 TEL : (201) 902-0347 FAX: (201) 902-0429
• SAMSUNG OPTO-ELECTRONICS UK LTD • TIANJIN SAMSUNG OPTO-ELECTRONICS CO.,
(SOUK) LTD (TSOE)
Samsung House, 1000 Hillswood Drive Hillswood 7 Pingchang Rd, Nankai Dist, Tianjin, P.R China
Business Park Chertsey Surrey KT16 OPS Post Code : 300190
TEL: 44-(0)1932-45-5308 FAX: 44-(0)1932-45-5325 TEL : 86-22-2761-9698 FAX: 86-22-2761-6514
www.samsungtechwin.com P/No. : 6086-0447-01A
www.samsungcctv.com
VAN 03. 11
PRECAUTIONS Do not touch the front glass of the
camera.
Do not install the camera in extreme Do not install or use the camera in an
temperature conditions. environment where the humidity is high.
It is one of the most important parts of camera.
Be careful not to be stained by fingerprint.
Only use the camera under conditions where It can cause the image quality to be poor.
temperatures are between -10˚C and +50˚C. Do not drop the camera or subject
Be especially careful to provide ventilation them to physical shocks.
when operating under high temperatures.
Do not install the camera under Never use the camera close to a gas
unstable lighting conditions. or oil leak.
It can cause malfunctions to occur.
Severe lighting change or flicker can cause It can cause malfunctions to occur.
Notes
the camera to work improperly.
• If the camera is exposed to spotlight or object reflecting the strong light, smear or blooming may occur.
• Please check the power whether it satisfies the normal specification before connecting the camera.
Do not disassemble the camera.
There are no user-serviceable parts inside it.
MINI DOME CAMERA 3 USER'S MANUAL
MINI DOME CAMERA
INSTRUCTION MANUAL
SID-42CN / CP
SID-22CN / CP
The lightning flash with arrowhead symbol, within an equilateral triangle is intended
to alert the user to the presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
INFORMATION-This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will required to correct the interference at his own expense.
WARNING -Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use other than specified power source.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform to all local codes.
COLOR CCD CAMERA 1 User's Manual
SAMSUNG CCD CAMERA
MINI DOME CAMERA
Never keep the camera face to strong GETTING TO KNOW YOUR CAMERA
light directly.
Front
Functional Selection
Switches
It can damage the CCD. You can control the
camera Using DIP Switches.
Pan Base
Do not expose the camera to rain or
You can rotate the lens from 360˚
spill beverage on it.
Back
Hole for fixing camera
If it gets wet, wipe it dry immediately.
Liquids can contain minerals that corrode the
electronic components.
MINI DOME CAMERA 4 USER'S MANUAL MINI DOME CAMERA
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before operating the camera, confirm the camera model and proper input power
voltage. In order that you can understand this manual thoroughly, we'll introduce our
model description.
SID-42C Model Series (410,000 Pixels)
SID-42CN
SID-42CP
Model Description
SID-42CX SID-22CX
Pickup Device
• Pickup Device
42C 410,000 Pixels Color CCD 22C
• Signal System
N NTSC P PAL
FEATURES
High Resolution: The horizontal resolution of 480 TV lines can be achieved by using a high density
CCD having effective 410,000 pixels, which provides clean, noiseless and reliable pictures. (SID-22C
series have 270,000 pixels and can achieve 330 TV lines.)
Powerful Back Light Compensation: The BLC technology allows the camera to obtain the clear
picture, the finest detail and perfect light contrast al though there is strong light back of the subject.
Functional Selection Switches: Camera Control is available using DIP switches.
Pan and Tilt: Pan and tilt are available after installing camera
1 USER'S MANUAL MINI DOME CAMERA 2
Accessories
M4 Taping Screw 2EA
User Manual Quick Install Guide
Tilt Base
You can adjust up and
down the camera(10°~90°). INSTALLATION
Installing Camera
1. Fix the camera to a ceiling or a wall using two screws.
2. After fixing it, adjust its pan base and
Label
tilt base properly.
Power Input Terminal
3. After adjusting them, secure the shield case and dome-
Power Input Jack
cover.
BNC Jack
Shield Case
Dome Cover
Label for Terminal Type Label for Jack Type
5 USER'S MANUAL MINI DOME CAMERA 6
SID-22C Model Series (270,000 Pixels)
SID-22CN
SID-22CP
Signal System (NTSC or PAL)
270,000 Pixels Color CCD
USER'S MANUAL
Cable Rubber
Template
Hole
Scerw Scerw Scerw
USER'S MANUAL