Maintenance; Admin - D-Link DCS-934L User Manual

Section 4 - Configuration
This section allows you to change the administrator's password and configure the server settings for your camera. You can also manage the user
account(s) that access your camera.
Old/New/Retype If you would like to change the admin password for your camera, enter the old
Password: password, enter the new password, then retype the new password and click
Apply.
Camera Name: Specify a name for your camera.
LED Control: Select Normal to enable the LEDs on the device, or select Off if you prefer to
disable the LEDs for a more discreet installation.
User Access Select Enable to enable user access or Disable to allow only the administrator
Control:
account to access the camera.
Snapshot URL Select Enable to allow access to the current camera snapshot using the web
Authentication: address shown.
Add User Create access to your camera's video for a new user. Enter the User Name,
Account: Password, and then verify the password for each user account. A maximum of
eight user accounts can be added into the user list. Click Add to add the account.
User List:
Displays the account names of authorized users. When user accounts are listed
here, the administrator will have the option to edit or delete user accounts.
D-Link DCS-934L User Manual

Maintenance

Admin

44