Table of Contents
Advertisement
3-2 Event Setup
3-2.1.1 Configuration
Item
Enable
3-2.1.2 Event Handling
Item
Log
Event Record
Popup
Popup Channel
Buzzer
Relay
PTZ
Go Preset
Resume Preset
3-2.1 Video Loss
Description
Enable/Disable video loss detection function
Description
Event occurs, whether written to the event log
Select channel for event recording when event occurs. The
video setup corresponds to the "Configuration → Recording
Settings → Event Video Recording" (refer to 3-1-1-2 Evnet
Record) 。
In live mode, if motion detection is detected, it will pop up the
channel full screen. You can specify a warning window display.
1: the main screen, 2: the second screen
Event occurs, pop up the channel display
Event occurs, whether to activate the buzzer
Event occurs, to activate the relay.
Event occurs, the display switches to the PTZ.
Event occurs, the display switches to the PTZ preset point,
values from 0 to 255.
After event, the display switches to the PTZ preset point,
values from 0 to 255.
2010.12.29 User Manual v1.0
31
Advertisement
Table of Contents
