Squeezebox™ Duet User Guide
Connect Squeezebox Duet
This step will connect Squeezebox Controller and Receiver to your local
network and allow you to select your music source. There are three sections,
each detailing the steps for the different network configurations described
in the section titled "Choose Your Network Setup" earlier in the User Guide.
You need only to follow the directions for your network setup
All-Wireless Network Configuration
In this configuration, both your Squeezebox Controller and Receiver are
connected to your 802.11 wireless network.
Set Up Squeezebox Controller
1.
Take Squeezebox Controller from the charger. If the Controller isn't
powered on, press the
2.
Use the
center
the
3.
The Welcome screen should appear. Press the
move to the next screen.
4.
Select the appropriate Wireless Region for your local region or
country.
Note: Failure to select the appropriate region may violate local laws.
If your country or region isn't listed, select the one closest to you.
5.
You'll see the Wireless Networks screen, listing the available wireless
networks. Scroll to your network and press
Note: If your router is configured not to broadcast its network name,
also known as the SSID, you won't see it on the list. You can connect
to it by selecting "Other network" and entering the network name by
hand.
Note: If you are certain your network name is broadcast but it isn't
appearing in the list, you may be out of range. If moving closer
doesn't correct the problem, double-check that your router is
broadcasting its network name.
home
scroll wheel
to highlight your choice of language and press
button to select it.
button to turn it on.
center
center
button to
to select it.
11
Need help?
Do you have a question about the Network Music System and is the answer not in the manual?
Questions and answers