TRIVIEW TLM-0801 Operating Instructions Manual page 7

2.8 Connectors
VIDEO:
A VIDEO 1: BNC input.
B VIDEO 1: BNC loop-through output.
C VIDEO 2: BNC input.
D VIDEO 2: BNC loop-through output.
E S-VIDEO (Y/C): Mini-Din 4-pin, Input.
PC:
F VGA: D-SUB 15 Pins Input connector.
AUDIO:
G AUDIO: RCA jack input.
H AUDIO: RCA jack loop-through output.
POWER:
I DC JACK: DC12V 1A (MAX.) output 2.5 Ø
J DC JACK: DC12V input, 2.5 Ø
Set up sequence:
1. Make sure the PC and Video source power are turned off.
2. Plug the power adapter, VGA and video signal cable to monitor.
3. Turn on the PC and Video source power.
4. Plug the AC power cord onto power adapter
[Use reverse sequence to turn-off the monitor]
7