Connecting Devices To The Server - Fujitsu PRIMERGY RX2540 M1 Operating Manual

5.3

Connecting devices to the server

The connectors for external devices are on the front and rear of the server. The
additional connectors available on your server depend on the expansion cards
installed. For further information refer to the "FUJITSU Server PRIMERGY
RX2540 M1 Server Upgrade and Maintenance Manual".
Figure 2: Connection panel on the rear
1 Video connector (blue)
2 Management LAN connector
3 Dynamic LoM (optional, different
variants)*.
*
The LAN connectors on the dynamic LoM modules are numbered in
ascending order from right to left beginning with "0".
connector (LAN 0) is the shared LAN connector respectively.
** The serial interface COM1 can be used as the standard interface or for
communication with iRMC.
RX2540 M1
4 2 USB connectors (USB 3.0)
5 2 USB connectors (USB 2.0)
6 COM1 connector (optional)**
Operating Manual
Hardware installation
The rightmost
53