Advertisement
Key or
5.
Press
to confirm user selection. (Example: we will choose and confirm User P4 for this test run)
The figurine on top of P4 will start blinking, once User P4 is confirmed, (see Fig. 9)
Key or
6.
Press
Male or Female. The age reading will start blinking, once Gender is confirmed, (see Fig. 10)
Key or
7.
Press
Male or Female. The Height will start blinking, once the Age is confirmed, (see Fig. 11)
Key or
8.
Press
Once your Height is confirmed, the following two screens will appear on the L.C. Display in
sequence indicating that the USER INPUT is now completed. (see Fig. 12)
9.
The scale will shut off in seconds by itself after User Data Input (FINISHED)
Important:
User needs to input user personal data into the scale for one time only.
When inputting user data into the scale, the unit will shut off by itself, if it is idled
for 15 seconds. If it does, you will have to re-enter the data from the beginning again.
Using the Body Weight Function– No data is needed to input into the scale.
Using the Body Fat Function - User MUST select a user setting from user P0 thru
user P9 and then INPUT USER DATA into scale before USING it.
Key
to select user setting from User P0 ~ User P9. Press
Key
to select Gender. Press
Key
to select Gender. Press
Key
to select your Height. Press
(Fig. 12-1)
Page: 5
(Fig 9)
Set Button
to confirm your selection of
(Fig. 10)
Set Button
to confirm your selection of
(Fig. 11)
Set Button
to confirm your Height.
Set Button
(Fig. 12-2)
Advertisement
