Advertisement
Errors Indicator:
Err2:
If body fat ratio, water ratio muscle ratio exceeds the range of display because of incorrect
operation, "Err" will be shown and the scale will be turned off automatically.
0-Ld:
Overloading: The maximum weight is 150.9kg. See below display.
LO:
Low voltage alert. If the battery is low on power (about 4.8V), the icon of battery will be
shown and please change the battery immediately.
ERR:
As inner code is too low or too high by the reason that the load cell has been damaged, the
scale will displays ERR. Defective – a replacement is needed.
Specifications:
Bioelectrical Impedance Analysis to check body fat and total body water percentage.
Weight capacity: 330lbs or 150kg
Weight Graduation: 0.2lb or 100g
Body Fat Graduation: 0.2% (in the range from approx. 3% -55%)
Body water Graduation: 0.2% (in the range from approx. 25-75%)
Muscle Graduation 0.2% (in the range from approx. 25-65%)
Height Range: 3'3" – 7'2" (approx. 100.0 – 220.0cm)
Age range: 10-80 years
Measures weight, body fat, and body water simultaneously
Weight-only feature with automatic step on
Can be use for up to 12 individuals
User selectable units of measure (lb/in) or (kg/cm) or (st)
Lower battery indicator
Operates on one 2 X 3-Volt (CR2032) Lithium button cells.
Precautions
1.
OVERLOAD WARNING: remove weight immediately when the scale displays Err. Otherwise,
permanent damage to the scale will occur.
2.
This Electronic Body Fat Analyzer/Scale is made for normal home use only; it is not designed
for use in commercial or medical fields.
3.
Clean after use with a damp cloth only. Do not use chemical cleaning agents or immerse the
unit into water. Do not let your Analyzer/Scale to turn into saturated with water as it may
damage the electronic components.
4.
It is a precision electronic product. Please handle with care.
Page: 12
Advertisement
