Operation Description; Factory Default Settings; Rebooting - UDP Technology IPC3500A-D Hardware Manual

4. Operation Description

4.1. Factory Default Settings

Factory default settings are as follows:
• IP address: 192.168.xx.yy (refer to 2.3 Serial Number / MAC Address)
• Mask: 255.255.0.0
• Gateway: 192.168.0.1
• User ID: root
• Password: pass
MAC address = 00-13-23-01-23-45 → IP address = 192.168.35.69
Factory Default (FD) initialization procedure is as follows
1. Turn ON the power.
2. Press "Reset" button when Status LED at LAN connector start to blink very rapidly.
3. Release "Reset" button when Status LED at LAN connector is blinking slowly.

4.2. Rebooting

Reset can be carried out as follows:
1. Press Reset for 1 second.
When Reset function is activated, Status LED and Network LED at LAN connector will blink
together, twice. User may stop pressing Reset at this point.
2. When "Reset" function has been completed, LEDs will stop blinking.
D
Convert the Hexadecimal number to Decimal number
UDP Co., Ltd.
IPC3500 Hardware Manual
13