Table of Contents
Advertisement
Video Loop Out
It is a loop back video output port.
DIP Switch for Camera Modes
AGC(Automatic Gain Control) ON/OFF switch
The automatic gain function automatically adjusts picture in accordance with the brightness of subject.
(Initial setting: ON)
A.I./E.E.
Electronic or Auto IRIS shutter control (Initial setting: A.I)
BLC (backlight compensation) ON/OFF switch
When switched on, the function adjusts exposure to compensate for situations where the subject is lit
from behind. (Initial setting: OFF)
FLK ON/OFF switch
If the camera is used with 50Hz fluoresent lighting, there is flicker on the screen.
In this case, F.L.K function should be set to on position. But F.L.K function should be set to OFF in
60Hz power source.
GAMA ON/OFF switch
Switch for Y-gamma setting (ON:=1/OFF:=0.45, Initial setting: OFF)
MIRROR ON/OFF switch
When the Mirror switch is set ON, the image will be reversed vertically.
3.5. Serial Number / MAC Address
Serial number and MAC address is attached on the bottom of IPC5300 as shown in Figure 15.
Serial Number
D
OFF
A.I
BLC FLK r=1 M IR R O R
O N
1
2
3
AGC
E.E
OFF OFF G A M M A OFF
Figure 14. DIP switch for camera mode
710030FFD
IPC3500
Figure 15. Serial Number / MAC Address
UDP Co., Ltd.
NC
NC
4
5
6
7
8
NC
NC
MAC 00:13:23:03:0F:FD
P140101010000 - 14001
IPC3500 Hardware Manual
MAC Address
12
Advertisement
Table of Contents
