Remove The Freezer Door - Samsung RS25J50 User Manual

3. Remove the freezer door

A few things to mention fi rst.
• Make sure that you lift the door straight up so
the hinges are not bent or broken.
• Be careful not to pinch the water tubing and
wire harness on the door.
• Place doors on a protected surface to prevent
scratching or damage.
• Is necessary, have two people disassemble the
doors.
1. With the Freezer door closed, remove the
upper hinge cover ( 1 ) using a screwdriver,
and then disconnect the wires by gently pulling
them apart ( 2 ).
(1)
Be careful not to damage the sensor
harness with the hinge cover.
2. Remove the hinge bolts ( 3 ) with a 10 mm
Socket Wrench.
Remove the ground screw ( 4 ) by turning it
counter-clockwise.
Take off the upper hinge ( 5 ) in the direction of
the arrow.
Take care that the door does not fall on you.
(4)
(3)
(5)
SSEDA Drop In- SSEDA Drop In- EN.indd 12 EN.indd 12
3. Open the Freezer door, and then remove the
door from the lower hinge ( 6 ) by carefully lifting
it up ( 7 ).
4. Remove the lower hinge ( 8 ) from the lower
hinge bracket ( 9 ) by lifting the lower hinge up
in the direction of the arrow.
(2)
CAUTION
Make sure to put the water line through the lower
hinge before assembling it.
Pressing Pressing
English - 12
(7)
(6)
(8)
(9)
2015. 2. 6. 2015. 2. 6. 9:39 9:39