Loewe Spheros R 26 Operating Instructions Manual page 43

What to do, if ...
Problem
Digital Link Plus does not function.
Various characters are displayed incorrectly in the
teletext.
No sound via external digital audio amplifi er.
Device on mounted motor unit does not rotate
(only Spheros R 32/37).
Possible cause
a) Euro-AV cable is not fully wired (pin 10 not
wired).
b) Some recorders can only adopt stations during
the initial installation of the TV set.
c) All or some of the terrestrial and cable stations
are stored on station storage locations ≥ 99.
The wrong character set is set in the teletext menu.
a) The external digital audio amplifi er does not
support the selected sound format (Dolby
Digital, dts, MPEG).
b) TV set and external digital audio amplifi er are
not connected.
Motor unit and connection for rotating stand control
are not connected to each other.
Remedy
a) Replace the Euro-AV cable.
b) Restore the recorder to the as-delivered state (see
recorder's operating instructions).
c) Rearrange the terrestrial and cable stations so
that they fall between 1 and 99.
Set the right character set: Teletext menu - Settings -
Character set: standard or the appropriate character
set.
a) Set PCM stereo on the DVD player in the sound
selection. For DVB stations, switch language/
sound selection (green coloured key) to Stereo on
the TV set in the status display (END).
b) Connect Digital-Out from the TV set to a Digital-In
of the external digital audio amplifi er and select
the appropriate input to this.
Use related cable to connect socket of motor unit
to interface of rotating stand control (see assembly
instructions for motor unit).
43 -