Canon PowerShot G3 X User Manual page 143

3
Choose [ ].
Press the [ ][ ][ ][ ] buttons or turn
z
the [ ] dial to choose [ ], and then
press the [ ] button.
4
Choose [Add a Device].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [Add a Device], and then
press the [ ] button.
5
Choose [WPS Connection].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [WPS Connection], and
then press the [ ] button.
6
Choose [PBC Method].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [PBC Method], and then
press the [ ] button.
7
Establish the connection.
On the access point, hold down the WPS
z
connection button for a few seconds.
On the camera, press the [ ] button to
z
go to the next step.
The camera connects to the access point
z
and lists devices connected to it on the
[Select a Device] screen.
8
Choose the target device.
Choose the target device name (either
z
press the [ ][ ] buttons or turn the [ ]
dial), and then press the [ ] button.
9
Install a driver (first Windows
connection only).
When this screen is displayed on the
z
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
Double-click the connected camera icon.
z
Driver installation will begin.
z
After driver installation is complete, and
z
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
10
Display CameraWindow.
Windows: Access CameraWindow by
z
clicking [Downloads Images From Canon
Camera].
Mac OS: CameraWindow is automatically
z
displayed when a Wi-Fi connection is
established between the camera and
computer.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
143