Preparing Your Radio For Use - Entel HT644 GMDSS User Manual

Preparing Your Radio For Use

---
Attaching / Removing the Belt Clip
5
To attach, slot the clip onto the slot on the
back of the battery and slide up until you
hear a "click"
6
To remove, pull the tab towards the belt
clip ( a ).Then slide the belt clip
downwards ( b )
Attaching / Removing Audio Accessories
3
To attach, remove the accessory cover by unscrewing the
locking screw anti-clockwise (leave cover secured under
antenna as this provides a waterproof seal). Attach accessory
plug by locating over the socket. Carefully tighten the locking
screw clockwise until finger tight (do not tighten with a
screwdriver etc).
4
To remove, unscrew accessory plug the locking screw by
hand in an anti-clockwise direction (carefully use a coin or
screwdriver if too tight). Ensure you re-fit the accessory
waterproof cover so as to protect the accessory socket.
5
4
2
a
b
6