Configure Picture In Picture (Pip) Mode - Loewe Xelos A 42 HD+ 100 Operating Instructions Manual

Picture in Picture

Configure Picture in Picture (PIP) mode

In the PIP menu you can set the PIP type (Split Screen or Small Picture), the
PIP function (Standard PIP or iPIP) and the position of the small picture.
Start PIP menu
➠ PIP mode started,
if not, press PIP button.
➠ The frame is green,
if not, press the green button.
Call the PIP menu.
TV menu
Settings
PIP
Type
Split screen
Switch to Small PIP / Split screen
➠ PIP menu open.
TV menu
Settings
PIP
Type
Small PIP
Select Type,
go to the menu line below.
Select Small PIP or Split screen.
33156_024_Xelos_A32_42_GB_9_00_B29 29 33156_024_Xelos_A32_42_GB_9_00_B29 29
INFO END
Functions
...
INFO END
Split screen
Change position of the PIP small picture
➠ Other than the status line, which may possibly be
displayed, no other display is shown on the screen:
Move the PIP into a corner of the screen.
The position of the small picture can also be selected
under Position in the PIP menu.
Switch to iPIP / Standard PIP function
➠ PIP menu open.
TV menu
Settings
PIP
Functions
iPIP
Select Functions,
go to the menu line below.
Select iPIP or Standard PIP.
In iPIP the frame around the PIP picture is orange.
iPIP operation:
When the iPIP function is set, the currently displayed
picture becomes the PIP picture on pressing the PIP
button. You can select other stations for the TV picture
and still keep an eye on the PIP picture. You can
temporarily "ban" commercials or programme sections
to the PIP picture in this way.
The PIP picture becomes the TV picture again (PIP off).
INFO END
Standard PIP
29 -
03.07.2008 15:38:05 03.07.2008 15:38:05