Saving And Restoring All The Data; Writing And Reading Of Programming Data - Sharp XE-A203A Instruction Manual

Saving and Restoring All the Data

5
Set the mode switch to the PGM position.
Saving (writing) all the data
s
Restoring (reading) the saved data
s
* The message "
When writing or reading is finalized, the message "***NORMAL END" will be printed. In case an error occurs, a
corresponding error message will be printed.
If you save all the data by using an SD memory card that contains some data, the existing data will
be erased and replaced with newly saved data. If you need the existing data, use another SD
memory card.

Writing and Reading of Programming Data

6
Reading the graphic logo data
Set the mode switch to the PGM position.
s
* The message "
reading is finalized, the message "***NORMAL END" will be printed. In case an error occurs, a corresponding
error message will be printed.
144
148
" will appear and stay on the display until all data is completely written or read.
145
" will appear and stay on the display until all data is completely read. When
The comfirmation message is printed.
@ s
The comfirmation message is printed.
@ s
The comfirmation message is printed.
@ s
To execute
*
1 A
l
To cancel
To execute
*
1 A
l
To cancel
To execute
*
1 A
l
To cancel
65