Table of Contents
Advertisement
User Manual
After confirming the hour selection, the minute indication will flash on the screen.
Press >> or << to select the minute and press ALARM to confirm the selection.
Note: During the alarm setting process if nothing is entered within 5 seconds, the
system will leave the setting mode.
When the time on the clock reaches the time set on the alarm (and the alarm
mode is ON), the "Beep" sound will be played. If the Soundship is in iPod,
Bluetooth, FM or AUX modes then the speaker will play in the selected mode.
To stop the alarm press the alarm button on the remote control.
Sleep time setting:
•
SLEEP
will be displayed
Press SLEEP on the remote control to select sleep setting mode.
60 Minutes
Note: This function will not work when in clock mode)
Preset sleep time will be shown on the screen.
Once in sleep setting mode, and preset sleep time is flashing on the display,
press >> or << to change the sleep time.
0 – 60 Minutes
Press SLEEP again to confirm the setting.
Note: During the sleep setting process if nothing is entered within 5 seconds,
the system will leave the setting mode.
If sleep time set to 0, sleep function will not be activated.
EQ setting:
●
Press the EQ on the remote control to select the EQ setting mode.
The "EQ" icon will be shown on the screen.
Once in EQ setting mode, and the current EQ setting is flashing on the display
(e.g. FLAT), press the EQ button again to scroll through the other settings.
There are 6 EQ settings to choose from:
FLAT - DANCE - JAZZ - CLASSICAL - POP - ROCK
Once you have chosen your preferred EQ setting, do not press the button
again and it will leave the setting mode and revert to play mode.
11
Advertisement
Table of Contents
