1. Manuals
  2. Brands
  3. YBIKE Manuals
  4. Bicycle
  5. Toyni
  6. Owner's manual

YBIKE Toyni Owner's Manual

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
WWW.YBIKE.CO.ZA

Advertisement

Table of Contents
loading

Related Manuals for YBIKE Toyni

Summary of Contents for YBIKE Toyni

  • Page 1 OWNER’S MANUAL WWW.YBIKE.CO.ZA...

  • Page 2: Safety Precautions

    IMPORTANT SAFETY NOTICE WARNING SAFETY PRECAUTIONS: Riding this product can be a hazardous activity and precautions should be taken to avoid dangerous situations. Be sure to read the entire manual before riding. Please pay close attention to the following precautionary measures: WARNING! This bike is intended to be assembled by an adult.
  • Page 3 The product should only be used on flat and level ground. DO NOT ride the balance bike on slopes. DO NOT go down a long descending slope or hill. Please be careful when passing these areas. Ensure that the product’s handlebar is securely fixed and that it moves smoothly by turning it left and right before allowing your child to use the product.
  • Page 4 TOYNI PARTS LIST & COMPONENTS Open the box and take out all of its contents. Make sure all of the parts and components listed below are included: NAME MAIN BODY WHEEL FORK 2 X BACK WHEELS FRONT WHEEL 2 X SHAFT CAPS...

  • Page 5: Assembly Instructions

    ASSEMBLY INSTRUCTIONS 1. Front Wheel Fork Assembly Position the Wheel Fork (No. 2) and Handlebar (No. 9) into the hole in The Main Body (No. 1) as shown. Ensure that the Wheel Fork is correctly posi- tioned inside the Handlebar. Push the Fork Bolt (No.

  • Page 6: Front Wheel Assembly

    ASSEMBLY INSTRUCTIONS 2. Front Wheel Assembly Position the Front Wheel (No.4) between the arms of the Wheel Fork (No.2) with their holes aligned. Push the Front Wheel Bolt (No.7) through the holes in the Fork and Wheel. Screw the Bolt Cap (No.8) into the threaded end of the Front...
  • Page 7 ASSEMBLY INSTRUCTIONS Back Wheel Assembly NOTE: The Shaft (No.11) has rectangular details. Ensure that it is correctly positioned when pushing it through the Main Body (No.1) & Back Wheels (No.3). Push the Shaft (No.11) through the hole at the back of the Main Body (No.1).
  • Page 8 BALANCING SETTINGS HOW TO CHANGE THE BALANCING SETTING ON YOUR TOYNI: Unscrew and remove the Shaft Caps (No.5)*. Remove the Back Wheels, flip, reposition onto Shaft and reattach Shaft Caps (No.5) BEGINNER BALANCING SETTING ADVANCED BALANCING SETTING *Refer to page 6 for Assembly Diagram.

  • Page 9: Check Before Riding

    Finally, after checking the above points, you can now start riding your new balance bike. WARNING! This product must be assembled by an adult. Read the manufacturer’s instructions before using. Keep the instructions safe for future reference. ENJOY YOUR YBIKE TOYNI WWW.YBIKE.CO.ZA...

Table of Contents