Listening To Audio From A Connected Component - Sony AWP-ZX7 Operating Instructions Manual

Micro hi fi component system
Table of Contents

Advertisement

To place the sub woofer
To obtain a better bass reproduction, we
recommend you to place the subwoofer on a
solid floor where resonance is unlikely to occur.
Notes
• Always place the subwoofer vertically, keeping it a
few centimeters away from the wall.
• If the sub woofer is placed in the center of a room, the
bass could be extremely weakened. This is due to the
influence of the standing wave of the room. If this
happens, move the subwoofer away from the center
of the room or eliminate the cause of the standing
wave, by placing a bookshelf against the wall, etc.
C AUX IN jacks
Use audio cords (not supplied) to connect an
optional analog component (MD deck or VCR,
etc.) to these jacks. You can then listen to the
sound from the component.
Listening to audio from a
connected component
1
Connect audio cords.
See "Hooking up optional components" on
page 30.
2
Press FUNCTION repeatedly until
"AUX" appears.
Start playing the connected component.
GB
31

Advertisement

Table of Contents
loading

Table of Contents