GMC 2010 Acadia Owner's Manual page 242

7-54 Infotainment System
Three Way Calling
Three Way Calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier to work.
1. While on a call press
The system responds with
Ready followed by a tone.
2. Say Three way call .
The system responds with
Three way call, please say
dial or call .
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press to link all the callers
together.
Ending a Call
Press to end a call.
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
To Mute a call
.
1. Press
responds with Ready followed
by a tone.
2. Say Mute Call . The system
responds with Call muted .
To Cancel Mute
1. Press
responds with Ready followed
by a tone.
2. After the tone, say Mute Call .
The system responds with
Resuming call .
Transferring a Call
Audio can be transferred between
the in vehicle Bluetooth system and
the cell phone.
. The system
. The system
To Transfer Audio to the Cell
Phone
During a call with the audio in the
vehicle:
1. Press . The system
responds with Ready followed
by a tone.
2. Say Transfer Call. The system
responds with Transferring call
and the audio will switch from
the vehicle to the cell phone.
To Transfer Audio to the In-Vehicle
Bluetooth System
The cellular phone must be paired
and connected with the Bluetooth
system before a call can be
transferred. The connection process
can take up to two minutes after the
key is turned to the ON/RUN or
ACC/ACCESSORY position.
During a call with the audio on the
cell phone, press for more than
two seconds. The audio switches
from the cell phone to the vehicle.