PetAirapy PA - 777 Instruction Manual page 14

Diagram of disassembly and installation of the
Aluminum Electric Static Plasma Filter
Diagram of disassembly:
Remove the front panel of the unit.
Slide out the combined ULPA filter by pulling on the fabric loops at the top and bottom of the
filter casing.
With the combined ULPA filter removed, use your fingertips to locate the indentations on the
sides of the Aluminum Electric Static Plasma Filter.
Slide the filter out smoothly.
Diagram of installation:
Use your fingertips to locate the indentations on the sides of the filter.
Line the filter up properly to its entrance into the unit and push it
forward into the unit smoothly.
PA - 777 / PA PRO | 14