PetAirapy PA - 777 Instruction Manual page 11

Press the POWER button. The POWER LED lights up and the unit powers on.
PA - 777
Press the ANION (Ion), UV and STATIC buttons to turn these features on and off individually. All three features are
on by default. Their corresponding lights will turn on and off on the LED panel as the feature buttons are toggled.
The ULPA + Activated Carbon + Photo Catalyst combination filter is working whenever the unit is powered on.
The remote control can control the functions separately.
It is recommended that ANION (Ion), UV and STATIC remain on for optimal benefit.
Mode settings (Air sensor function must be off)
Press the MODE button repeatedly to select the preferred mode of operation: MANU (Manual), AUTO
(Automatic), 1H, 2H or 4H function.
The MODE LED will show:
MANU: Manual mode; the unit needs to be turned on and off manually
AUTO: Automatic mode; the unit is set to alternate in 20 minutes on, 40 minutes off cycles
1H: The unit will power off after 1 hour
2H: The unit will power off after 2 hours
4H: The unit will power off after 4 hours.
Manual Mode
Power LED
UV
ANION (Ion)
Static
LOW Fan Speed
Manual Mode
PA- PRO
The air sensor function must be off to use any
individual MODE settings.
PA - 777 / PA PRO | 11