Table of Contents
Advertisement
1: An isolation transformer should be connected in the
power line between the receiver and the AC line when a
service is performed on the primary of the converter
transformer of the set.
2: Comply with all caution and safety-related notes
provided on the cabinet back, inside the cabinet, on
the chassis or the picture tube.
Product safety should be considered when a component replacement is made in any area of a receiver. Components
indicated by mark
!
special significance. It is particularly recommended that only parts designated on the parts list in this manual be used
for component replacement designated by mark
made for replacement items designated by mark
Important recycling information.
Your SANYO product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of seprately.
In the European Union there are separate collection systems for
used electrical and electronic products.
Please help us to conserve the environment we live in!
Note: This symbol mark and recycle system are applied only to
EU countries and are not applied to other countries of the
world.
N4JKT
SAFETY PRECAUTION
PRODUCT SAFETY NOTICE
in the parts list and the schematic diagram designate components in which safety can be of
Power source
Television system
Colour system
Receiving channel
Aerial input impedance
AV terminal
AV1:
INPUT:
OUTPUT:
AV2:
INPUT:
OUTPUT:
AV3:
INPUT:
OUTPUT:
Audio M.Out
HDMI
INPUT:
PC
INPUT:
Serial Port
INPUT/OUTPUT:
Contrast Ratio
Display Resolution
Viewing Angles
Dimensions (WxHxD)
Weight
3: When replacing a chassis in the cabinet, always be cer-
tain that all the protective devices are installed properly,
such as, control knobs, adjustment covers or shields,
barriers, isolation resistor-capacitor networks etc. Before
returning any television to the customer, the service tech-
nician must be sure that it is completely safe to operate
without danger of electrical shock.
. No deviations from resistance wattage or voltage ratings may be
!
.
!
SPECIFICATIONS
AC 220~240V, 50Hz
System I B/G, D/K, L/L'
PAL/NTSC4.43 (PAL/NTSC4.43/NTSC3.58 IN AV MODE)
UHF: 21~69
VHF: E2-E12, F2-F10, R1-R12
CATV: X, Y, S1-S41, B-Q
75ohm
CENELEC standard
Composite video, RGB and Audio L/R
TV-output with composite video and audio L/R
BNC
RGB, H and V / Y, Pb, Pr and audio L/R
RGB, H and V / Y, Pb, Pr
BNC
Composite video
Composite video
Cinch: L/R
HDMI GROUP Standard
RS232C
800:1
1366 x 768 (WXGA)
H: 178°, V: 178°
1050 x 654 x 162
40 Kg
!
RoHS
.This product does not contain any hazardous substances prohibited by the RoHS Directive.
(Y ou will find "R" or "Z" at the last digit of the serial number or an "RSF" label near the rating plate on
the RoHS compliant product.)
WARNING
!
.You are requested to use RoHS compliant parts for maintenance or repair.
.You are requested to use lead-free solder .
-2-
Advertisement
Table of Contents
