Table of Contents
Advertisement
1: An isolation transformer should be connected in the
power line between the receiver and the AC line
when a service is performed on the primary of the
converter transformer of the set.
2: Comply with all caution and safety-related notes
provided on the cabinet back, inside the cabinet, on
the chassis or the LCD panel.
Product safety should be considered when a component replacement is made in any area of a receiver.
Components indicated by mark
safety can be of special significance. It is particularly recommended that only parts designated on the parts list in
this manual be used for component replacement designated by mark
or voltage ratings may be made for replacement items designated by mark
Important recycling information.
Your SANYO product is designed and
manufactured with high quality materials
and components which can be recycled
and reused.
This symbol means that electrical and
electronic equipment, at their end-of-life,
should be disposed of seprately.
In the European Union there are separate collection systems for
used electrical and electronic products.
Please help us to conserve the environment we live in!
Note: This symbol mark and recycle system are applied only to
EU countries and are not applied to other countries of the
world.
N4FB
SAFETY PRECAUTION
PRODUCT SAFETY NOTICE
in the parts list and the schematic diagram designate components in which
!
SPECIFICATIONS
Power source
Television system
Colour system
Receiving channel
Aerial input impedance
Rear AV terminal
SCART:
INPUT:
OUTPUT:
Sound output(Music)
Contrast ratio
Display resolution
Dimensions (WxHxD)
Weight
3: When replacing a chassis in the cabinet, always be
certain that all the protective devices are installed
properly, such as, control knobs, adjustment covers
or shields, barriers, isolation resistor-capacitor networks
etc. Before returning any monitors to the customer,
the service technician must be sure that it is completely
safe to operate without danger of electrical shock.
. No deviations from resistance wattage
!
AC 220~240V 50Hz
System I
PAL/NTSC4.43 (PAL/NTSC4.43/NTSC3.58 IN AV MODE)
UHF: #21~69
VHF: A-J E2-E12
CATV: X,Y,Z,S1-S41
75ohm
CENELEC standard
Composite video, RGB and Audio L/R
TV-output with composite video and audio L/R
N/A
600:1
640 x 480 (VGA)
486 x 383 x 83 mm
5.2 Kg
!
RoHS
.This product does not contain any hazardous substances prohibited by the RoHS Directive.
(Y ou will find "R" or "Z" at the last digit of the serial number or an "RSF" label near the rating plate on
the RoHS compliant product.)
WARNING
!
.You are requested to use RoHS compliant parts for maintenance or repair.
.You are requested to use lead-free solder .
2
.
!
Advertisement
Table of Contents
