Emptying The Machine Tank; Topping Up The Boiler Water Tank With Water - Vax VCST-01 User Manual

WARNING: Empty the machine tank (M) every time you finish using it.
CAUTION! Before removing the tank, switch off the appliance and unplug it.
•
Completely press the two buttons (U) located besides the hand-
grip (T)
(picture 48)
•
Lift up the handgrip (T)
•
Lift up the handle (N) and remove the machine tank (M)

11 TOPPING UP THE BOILER WATER TANK WITH WATER

The boiler water tank (L) supplies the boiler through an electronic level
control; since this is an external tank, it can be topped up any time.
When water runs out in the boiler water tank:
•
1. the appliance beeps intermittently
2. the no-water level pilot light (G) flashes
3. the steam stops coming out

10 EMPTYING THE MACHINE TANK

(pictures 49-50)
•
Turn the handle (N) over and pull the filter assembly (O) up/forward
(picture 51)
•
Check the solids filter (R) and remove any deposits. If steam or
liquids have been vacuumed or of filtration water has been used,
rinse the internal part of the tank as well as the filter assembly
components with running water.
•
Check and eventually clean the microfibre filter (P)/ sponge filter (Q)
with running water from the inside out; let it dry before reassembling
the filter assembly.
•
To make for easier cleaning of the internal part of the tank, regularly
remove the internal baffle (Z)
of the internal baffle (Z), see picture. To put it back, wedge the baffle
onto the edge of the tank by hooking the ends.
To top up, proceed as follows:
•
Switch off the boiler switch (E)
•
Turn off the main switch (D)
•
Remove the cable from the socket
•
Remove the boiler water tank cap (C)
•
Fill the boiler water tank (L) (picture 53)
•
Put on the boiler water tank cap (C)
:
carefully unlock both ends
(picture 52)
15