Durabase Divider; Pull Out Drawer - LG MFL68680403 Owner's Manual

DURABASE
1. To remove the Durabase, push it back to the
end as much as possible. Tilt up the front of
the Durabase and pull straight out.
2. To install, insert the Durabase in rail assembly.
1
USING YOUR REFRIGERATOR
2

DURABASE DIVIDER

The Durabase divider allows you to organize the
Durabase area into sections.
WARNING : If the Durabase divider is
removed, there is enough open space for
children or pets to crawl inside. To prevent
accidental child and pet entrapment or
suffocation risk, DO NOT allow them to play
inside of drawer.

PULL OUT DRAWER

To remove the drawer, push the tabs located
on the front inside surface of each rail. Next,
gently lift the rear left and right sides of the
drawer and pull it out.
Bracket
To reinstall, pull out both rails to full
extension. Insert the end of rib in the bracket
at left and right. Making sure that the guides
at the front are lined up properly, gently push
down on both sides.
25