Sharp SF-2020 Service Manual page 30

3. Remove the size block upward, and fit to the suitable
paper size.
A3 size B4 size
A3
Hole Hole Hole
B5 size
A5
R
B5
Hole
Hole Hole
A5 size
When the size is changed to A5, fit
Special
Hole Hole
the size block display to"Special."
Caution
•
When the tray paper size is changed, be sure to change the size
block.
If not, the paper size display lamp keeps indicating the previous
size.
4. Attach the tray.
Reverse the removing procedure of the tray. (Tilt upward and insert
the tray then push it into the machine.
5. Set paper, and change the paper size display.
Remove the paper size display plate, and insert it so that the selected
paper size is visible from the paper size display slit.
When A5 size is selected, set to "Special."
A4 size
B4 A4
Hole
size B5 size
R
A4R
B5R
Hole
Hole Hole
4 – 12