Test Mode - Aiwa HS-PX307 Service Manual

TEST MODE

This model has a test mode function in the disassembled condition.
1. How to use the test mode:
• Short the test land in the MAIN C.B.
• Auto-stop function is not detected by micro-computer while test mode is active.
Note: Make sure that the test land is opened after the test mode is de-activated.
(Auto-stop function is not available with shorted land condition.)
2. How to disassemble the circuit board.
• Removes the soldering part in the MAIN C.B (with the
• Removes two screws.
Screw
TP701
TEST
mark).
- 10 -
Screw