Remote Controller - Mitsubishi Electric PEAD-RP1.6EA Technical & Service Manual

• Remote controller

[Operation buttons]
1
2
3
1
[Room temperature adjustment] Button
2
[Timer/continuous] Button
3
[Selecting operation] Button
4
[Time selection] Button
[Time-setting] Button
5
[Louver] Button (This button does not operate in this model)
6 [Fan speed adjustment] Button
7 [Up/down airflow direction] Button (This button does not operate in this model)
8 [Ventilation] Button
9 [Checking/built-in] Button
0 [Test run] Button
A [Filter] Button (This button does not operate in this model)
B [ON/OFF] Button
C
Position of built-in room temperature sensor
• Never expose the remote controller to direct sunlight. Doing so can result in the erroneous measurement of room
temperature.
• Never place any obstacle around the lower right-hand section of the remote controller. Doing so can result in the erroneous
measurement of room temperature.
6
•
CENTRALLY CONTROLLED
CLOCK
CHECK
˚C
STAND BY
ERROR CODE
DEFROST
TEMP.
TIMER SET
PAR-20MAA
Once the operation of the unit is set, subsequent operations can
be performed only by pressing the ON/OFF button repeatedly.
1Hr.
ON OFF
˚C
FILTER
CHECK MODE
TEST RUN
FUNCTION
NOT AVAILABLE
ON/OFF
FILTER
CHECK TEST
4 5 6 8 7 9
B
A
0
C