Roland GAIA SH-01 Quick Manualbook page 4

STEP Create a Sound!
2
Create a Bass Sound
1.
Call up the "PRESET B-1" patch.
Press the [PRESET Press the [BANK]
then press the
PATCH] button
2.
Press the [KEY HOLD] button so it's blinking.
3.
Press the second C key from the bottom.
You'll hear an arpeggiated techno bass.
4.
Turn the FILTER [RESONANCE] knob to the
maximum position.
5.
Slowly turn the FILTER [CUTOFF] knob from
the maximum position down to the minimum.
It's effective to make this change in sync with the tempo.
6.
Set the [RESONANCE] knob at 10 o'clock, and
the [CUTOFF] knob at 12 o'clock.
7.
In sync with the tempo, raise the LFO [FILTER DEPTH]
slider, and then bring it back to the center.
For the LFO DEPTH, the center is 0.
A NOTE OF
Use the [CUTOFF] Knob to Fatten the Sound!
ADVICE
Moving the [CUTOFF] knob will make the sound fatter or brighter. Once you've
familiarized yourself with its function, try moving the [CUTOFF] knob between
10 o'clock and one o'clock while you raise and lower the LFO [FILTER DEPTH]
slider. It's effective to do this in sync with the tempo.
6
Press the [1] button
button and
[2] (B) button
Let's try playing an arpeggiated synth bass sound.
Turn the filter knob to make the sound change.
How Do I Stop the Sound?
Press the [KEY HOLD] button to stop the sound.
Add More Low End!
Turn on the [TONE 3] button, and play the keyboard.
Layering three tones produces an even fatter sound.
Save The Patch You've Created
The GAIA SH-01 has internal memory in which you can store 64 patches
that you've created.
By using USB memory (sold separately), you'll be able to store 64 more
patches.
To save your patch, press the [WRITE] button and then select the save-destination patch number; finally press
the [WRITE] button once again.
Press the [WRITE]
Select a
Select the GROUP
Press the
USER PATCH
and then press one
USB MEMORY PATCH
of the
A NOTE OF
Layer Tones to Create Fat Sounds!
ADVICE
The GAIA SH-01 lets you layer three tones together,
allowing you to create incredibly fat sounds. Use the
TONE buttons to turn each tone on/off.
button
BANK
Select a NUMBER
[BANK]
Press one of the [1]–[8]
buttons
[1]–[8] buttons
7