1. Manuals
  2. Brands
  3. QView Manuals
  4. Digital Presenters
  5. QD3900
  6. Owner's manual

QView QD3900 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Visual Presenter
Owner's Manual
Model: QD3900

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the QD3900 and is the answer not in the manual?

Questions and answers

Related Manuals for QView QD3900

Summary of Contents for QView QD3900

  • Page 1 Visual Presenter Owner’s Manual Model: QD3900...
  • Page 2 PRECAUTIONS Please follow these precautions: To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent electrical shock, do not open the cabinet. Refer to qualified personnel for service only. Do not use the unit continuously for more than 24 hours with camera auto focus on.

  • Page 3: Table Of Contents

    CONTENTS: PARTS IDENTIFICATION ................. 3 CONTROL PANEL .................... 3 BUTTON INSTRUCTION .................. 4 REMOTE CONTROL ..................4 CONNECTIONS ....................6 BASIC PREPARATIONS ................... 6 PAL/NTSC VIDEO OUTPUTS ................ 10 WORKING ON THE STAGE ................10 WORKING OUTSIDE THE STAGE ..............10 LIGHT ......................

  • Page 4: Parts Identification

    PARTS IDENTIFICATION Camera Camera stand Arm lights Button instruction Connectors Back light Connectors Remote control slot Stage Operation panel CONTROL PANEL Rot (Rotate the image) Frz (Freeze the image) Neg (Display film negatives) Text (Switch between image/text mode) Save (Save captured images) (Freeze the top 1/8 of the screen) Title Split (Split Image function)

  • Page 5: Button Instruction

    HDMI/VIDEO (HDMI equipment/ Video input signal selection) LAMP (Control the arm lights and back light) AUTO (To auto white balance and auto focus) (Zoom in and out) BUTTON INSTRUCTION REMOTE CONTROL...
  • Page 6 POWER (Control the visualizer On/Off) SAVE (Save captured images) RECALL (Multiple Screen Display) LAMP (Control the arm lights and back light/Press the button more than 5 seconds to delete all pictures stored in the Flash ROM) ROTATE (Rotate the image) FREEZE (Freeze the image) NEG (Display film negatives) MIRROR (V-Reverse the image)

  • Page 7: Connections

    CONNECTIONS Rear Panel VIDEO OUT HDMI OUT DC 12V IN AUDIO IN COMPUTER IN AUDIO VIDEO AUDIO OUT PROJECTOR COMPUTER OUT HDMI IN Side Panel PROJECTOR RGB IN AUDIO IN RS232 #1 DC-12V-IN #2 VIDEO AUDIO IN #3 VIDEO IN #4 COMPUTER AUDIO IN #5 COMPUTER IN #6 COMPUTER OUT...
  • Page 8 2. Open the arm lights and rotate the camera head until they are properly positioned. Arm lights 3. Making connections: Before making any connections, turn off all the power. Please ensure that the visualizer along with all other equipment to be connected are turned off. Step 1: Connect power source.
  • Page 9 RS232 cable. Some projector models may require a converter cable in addition to this standard RS232 cable to connect to the projector control port, for the pin locations and shape of some projectors‟ control port connector may be different from the connector of a standard RS232 cable. Once the visualizer is connected to the projector, you can control the projector‟s power on, standby and input selection by using the visualizer.
  • Page 10 Step 5: Connect to the video equipment with Video input. Video Cable Video out Audio out Video equipment Rear Panel DC 12V IN AUDIO IN COMPUTER IN VIDEO OUT HDMI OUT AUDIO VIDEO HDMI IN AUDIO OUT PROJECTOR COMPUTER OUT Projector (or amplifier/speaker equipment) Audio input...

  • Page 11: Pal/Ntsc Video Outputs

    PAL/NTSC VIDEO OUTPUTS The S-Video and composite video outputs are set to PAL (NTSC) during manufacturing. WORKING ON THE STAGE 1. Place your material on the platform. 2. Select the enlargement required using the “ T ” and “ W ” buttons. 3.

  • Page 12: Adjusting Image Size

    ADJUSTING IMAGE SIZE To reduce or enlarge the image size displayed on the screen, press the “ T ” (Zoom in) or “ W ” (Zoom out) button. WORKING WITH NEGATIVES The visualizer is automatically set to display normal materials on the screen when the power is on.

  • Page 13: Brightness Adjustment

    BRIGHTNESS ADJUSTMENT If the image effect is not satisfactory, you can adjust the brightness to get a better image effect. Use the “BRIGHT +” or “BRIGHT -” button to adjust the brightness. To increase the brightness, press the “BRIGHT +” button. To decrease it, press the “BRIGHT -”...

  • Page 14: Projector On/Standby

    PROJECTOR ON/STANDBY Press the “POWER” button to turn on the visualizer‟s power and press the “Ppw” button to turn the projector power on. To place the projector on standby after the use, press the “Ppw” button and hold for more than 2 seconds.

  • Page 15: Installing Visualizer Software

    button to delete the selected image. Press to exit the 4 x 4 image display mode. On the remote control, the “RECALL ”,“ ”, “ ”, “ ”, “ ”, “ ” and “TEXT” button can do the operation. Press “EXIT” to exit the 4 x 4 image display mode.

  • Page 16: Usb Image Capture

    * Please pay attention to the following: Computer hardware requirement: CPU: 2.4GHz, RAM: 256M or above, Graphic card 64M, USB 2.0 port, Hard disk 40G or more, Monitor display resolution higher than XGA (1024 x 768). Operating system: Windows XP SP2 ，Win7. Must use a high-speed USB 2.0 cable provided .

  • Page 17: Controlling Visualizer By Computer

    Click [Capture]  [Set Frame Rate], and click open “Choose Frame Rate” to set the frame rate. D. Set Time Limit Click [Capture]  [Set Time Limit] to set the time limit while capturing video. E. Note: Do not connect / disconnect the USB cable when the application is running, which will cause the program to be interrupted.
  • Page 18 When the indicator of “Current RS-232 Connection Status” is green, that means the connection between the visualizer and the computer‟s RS232 connector is good. If the indicator is red, please check if the RS232 cable is connected correctly. When all the cables are connected correctly, please click “Projector”...
  • Page 19 In the POWRE ON box,Input : be, ef, 03, 06, 00, ba, d2, 01, 00, 00, 60, 01, 00. Then use the same input rule to input other code. b. If the data is in the character string format, input „character string‟. For example: the “POWER ON”...
  • Page 20 5. If you can not use buttons on the operation panel to control the projector, please use Code-Writing software‟s projector control code testing function to check if the control code is correct. Click “Projector” button, the following dialog box appears as below: Connect the visualizer to a computer with a RS232 cable (Please disconnect the projector from the RS232 port first) and select the Baud Rate and Parity based on the projector‟s Baud Rate, then click the “TEST”...

  • Page 21: Folding The Unit

    FOLDING THE UNIT 1. Fold the right arm light down first onto the base, then the left arm down. Rotate the camera head clockwise until the camera head is parallel to the camera stand. 2. Carefully fold the camera stand down to the front panel. Cautions: a.

  • Page 22: Specifications

    SPECIFICATIONS Resolution XGA, SXGA, WXGA,720P, 1080P Total Pixels 2,000,000 12 x optical zoom, 10 x electrical zoom Lens Motorized Camera Head Camera Rotation Vertically 330° Focus Auto/manual selectable White balance Auto Negative/positive conversion Black/white and color selection Yes Image/Text mode conversion Split Image Image Title Image Freeze...
  • Page 23 Memory higher than 256 MB USB connector frames/sec RS-232 connector D-Sub, 9-pin, male / 6-pin PS/2 USB port USB 2.0 Power consumption Shooting area 380X285 mm Folded: 510 x 410 x 120mm Dimension (W x D x H) Setup: 510 x 530 x 570mm Packing: 650 x 540 x 230mm N.W: 5.5Kg (12.1lbs) Weight...
  • Page 24 QOMO HITEVISION, LLC Toll Free: 1-866-990QOMO E-Mail: info@qomo.com Web: www.qomo.com...

Table of Contents