Mitsubishi Electric PUHZ-P200YHA Service Manual page 63

SW2 setting
The number of connected indoor units
ON
1 2 3 4 5 6
Capacity setting display
ON
1 2 3 4 5 6
Outdoor unit setting information
ON
1 2 3 4 5 6
Indoor pipe temperature/Liquid (TH2(1))
Indoor 1
ON
– 39~88
1 2 3 4 5 6
Indoor pipe temperature/Cond./Eva.
(TH5(1))
ON
Indoor 1
– 39~88
1 2 3 4 5 6
Indoor pipe temperature/Liquid (TH2(2))
Indoor 2
ON
– 39~88
1 2 3 4 5 6
Indoor pipe temperature/Cond./Eva.
(TH5(2))
ON
Indoor 2
– 39~88
1 2 3 4 5 6
Indoor room temperature (TH1)
8~39
ON
1 2 3 4 5 6
Display detail
63
Explanation for display
0~4
(The number of connected indoor units are dis-
played.)
Displayed as an outdoor capacity code.
Capacity Code
40
P200
50
P250
• The tens digit (Total display for applied setting)
Setting details Display details
H·P / Cooling only 0 : H·P
Single phase / 3 phase 0 : Single phase 2 : 3 phase
• The ones digit
Setting details Display details
Defrosting switch 0 : Normal
(Example) When heat pump, 3 phase and defrosting
(normal) are set up, "20" is displayed.
– 39~88
(When the temperature is 0: or less, "–" and
temperature are displayed by turns.)
– 39~88
(When the temperature is 0: or less, "–" and
temperature are displayed by turns.)
– 39~88
(When the temperature is 0: or less, "–" and
temperature are displayed by turns.)
– 39~88
(When the temperature is 0: or less, "–" and
temperature are displayed by turns.)
8~39
Unit
Unit
Code
display
1 : Cooling only
Code
display
1 : For high humidity
:
:
:
:
: