Mercedes-Benz CL 55 AMG Operator's Manual page 188

Cl-class series
Hide thumbs Also See for CL 55 AMG:
Table of Contents

Advertisement

Warning!
When closing the windows, be sure that there is no
danger of anyone being harmed by the closing
procedure.
In case of obstruction, the automatic reversal will
not operate if a door window is being closed by
pressing the switch to its resistance point and
holding it there, or when using the electronic key.
The closing procedure of door windows can be
immediately reversed by either pressing the switch
or pressing button Πon the electronic key and
holding it, or (vehicle with KEYLESS-GO) when
carrying the KEYLESS-GO-card, pull and hold a
door handle.
When leaving the vehicle, always remove the
electronic key from starter switch, take the
KEYLESS-GO-card (if so equipped) with you, and
lock your vehicle. Do not leave children unattended
in the vehicle, or with access to an unlocked
vehicle. Unsupervised use of vehicle equipment
can cause serious personal injury.
Interior equipment
Instruments
Operation
and controls
Instrument
Driving
cluster display
Blocking of rear side window operation
If no operation of the rear side windows by switch (for
instance by children) is desired, slide override
switch (5) to the right; the N symbol becomes
visible, see page 183.
Operation of the rear side windows with the switches
located in the driver's door is still possible.
Synchronizing power windows
If the power supply was interrupted, (battery
disconnected or low), the windows cannot be opened or
closed by the express feature.
To resynchronize the express feature, press j side of
power window switch until the window is completely
closed and hold down for approximately 1 second.
Repeat procedure for each window.
The automatic full opening and closing procedure of the
windows should now be restored.
185
Practical hints
Car care
Technical
Index
data

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl 500Cl 600

Table of Contents