Installation And Connections; Installation; Mounting The Lens - Sony DXC-990P Instructions For Use Manual

Installation and Connections

B

Installation

Mounting the Lens

Only 1/2-inch bayonet-mount lenses can be
attached to the camera.
Note
After mounting the lens, be sure to attach the
supplied lens mount stopper to prevent the
lens from getting loose.
1
Turn the mount lever
counterclockwise as far as it goes.
(If the lens mount cap is in place, remove
it.)
2
Align the positioning pin on the lens
with the matching hole in the lens
mount and attach the lens (not
supplied).
Lens mount
30
Installation
3
Turn the mount lever clockwise as far
as it goes to lock the lens in the lens
mount.
4
Attach the supplied lens mount
stopper to the boss on the camera.
Lens mount stopper
5
Connect the lens cable to the LENS
connector on the camera.
(When attaching a lens with a built-in
cable)