Factory Default Settings
To reset the extender to factory default settings, you can use either the Factory Reset button
on the rear panel or you can log in and click the onscreen RESET button. For more
information, see
Return the Extender to Its Factory Default Settings
The following table shows the factory default settings.
Table 2. Factory default settings
Feature
Smart Setup
WiFi communication
WiFi network name (SSID)
Security
Transmission speed
Country/region
Operating mode
Data rate in the 2.4 GHz band
Data rate in the 5 GHz band
DHCP
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and
environmental factors, including volume of network traffic, building materials and construction, and network
overhead lower actual data throughput rate.
AC750 WiF Range Extender
Default Settings
Enabled
Enabled
NETGEAR_EXT
Disabled
1
Auto
Varies by region
802.11a/b/g/n/ac
54/145/300 Mbps
54/145/300/433 Mbps
Client enabled
Factory Settings and Technical Specifications
46
on page 37.