Connecting The Aerials; Connecting To A Linn Akurate Kontrol - Linn FM/AM/DAB TUNER Owner's Manual

Connecting the aerials

The AKURATE Tuner is supplied with indoor aerials, however better
reception will be obtained by using external aerials mounted on a roof.
The supplied F-type adapter is for connection to the FM AERIAL
input, if required. For DAB, use a dipole antenna, or in areas of poor
reception a Yagi-type antenna. In either case, the antenna should be
connected to the AKURATE Tuner using 75 Ω coaxial cable. For
further advice on external DAB, FM or AM aerials please contact your
Linn retailer.
FM and AM aerials
Connect the supplied FM and AM aerials as shown.
FM aerial
The end of the FM aerial should be connected to a wall as high as the
length of the aerial will allow. You may have to experiment with its
positioning to obtain the best reception.
AM aerial
For best reception, position the AM aerial away from the AKURATE
Tuner and sources of radio frequency emissions (e.g. television,
computer). As with the FM aerial, you may have to experiment with its
position to achieve the best reception. For some stations you may
obtain better reception by rotating the aerial.
4 AKURATE TUNER
DAB aerial
For best reception attach the aerial to a wall as high as the length of
wire will allow. Attach the arms of the aerial to the wall vertically, as
shown.
Connecting to a Linn AKURATE KONTROL, other
pre-amplifier or AV system controller
To pre-amplifier or
AV system controller
Note:
The analogue connectors output DAB, FM and AM.