Boot Screen; Boot Settings Configuration - ASROCK 970DE3/U3S3 User Manual

This Manual: http://www.manuallib.com/file/2587857

3.6 Boot Screen

In this section, it will display the available devices on your system for you to confi g-
ure the boot settings and the boot priority.
BIOS SETUP UTILITY
Main OC Tweaker Advanced
Boot Settings

Boot Settings Configuration

[1st Floppy Device]
1st Boot Device
2nd Boot Device [HDD: PM - HDS722580VL]
3rd Boot Device [CD / DVD: 3S - CD - ROM C]
4th Boot Device [USB]
Hard Disk Drives
Removable Drives
CD/DVD Drives
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
3.6.1 Boot Settings Configuration
BIOS SETUP UTILITY
Boot Settings Configuration
Full Screen Logo
AddOn ROM Display
Boot From Onboard LAN
Bootup Num-Lock
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Full Screen Logo
Use this item to enable or disable OEM Logo. The default value is [Enabled].
AddOn ROM Display
Use this option to adjust AddOn ROM Display. If you enable the option "Full
Screen Logo" but you want to see the AddOn ROM information when the
system boots, please select [Enabled]. Confi guration options: [Enabled]
and [Disabled]. The default value is [Enabled].
Boot From Onboard LAN
Use this item to enable or disable the Boot From Onboard LAN feature.
Bootup Num-Lock
If this item is set to [On], it will automatically activate the Numeric Lock
function after boot-up.
H/W Monitor Boot Security Exit
Configure Settings
during System Boot.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Boot
Disabled: Displays
normal POST messages.
[Enabled]
Enabled: Displays OEM
[Enabled] Logo instead of POST
[Disabled] messages.
[On]
Select Screen
Select Item
+ - Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
49