Table of Contents
Advertisement
•
•
Maneuver restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for buses is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
•
•
Maneuver restrictions and directional constraints are taken into account when
planning a route.
•
Roads are used only if access for taxis is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
•
Road types used or avoided in route calculation:
•
•
•
•
•
Real-time Traffic events are also taken into account and sometimes greatly modify the route.
Clarion Mobile Map automatically recalculates the route if you deviate from the proposed itinerary or if a
newly received Traffic event concerns a part of the recommended route.
For further information about Route settings, see page 97.
5.1.5 Green routing
Route calculation is not only about finding the quickest or shortest route. For some of the vehicle types,
you can also check the fuel consumption and CO
cost effective routes with less effect on the environment.
In Route settings, you can edit the parameters of the selected vehicle. Enter the fuel consumption values
and the price of the fuel. You can also select whether you want to see the difference between your route
and the green route even if the selected routing method is not Green.
After the above parameters are set, select
also fuel efficient route. Note that travel cost and CO
cannot take elevations, turns, curves and traffic conditions into account. Also, this routing is not meant to
88 NX604 English
:
:
emission when planning a route, and you can create
2
emission calculations are estimations only. They
2
as route planning method to get a fast but
Advertisement
Table of Contents
