Table of Contents
Advertisement
NovaJet PROe Series
9
Slide the media roll over the media roller. If you will be using the takeup
roller, mount a media core on the takeup roller before inserting the roller in
the stand. Mount the two rollers as shown below. Insert the end of a roller
into the notch provided in the left roller support, then fit the other end of the
roller into the right support.
10
Slide the media guide into the media core, and secure it by tightening the
locking mechanism. If you moved the sensor mounting bracket before loading
the roll media, be sure to return it to its normal position.
Removing protective shipping material
Before turning on the printer, make sure to remove the protective material that secures
the PROe series ink cartridge carriage. Remove the protective film from the control
panel and remove the tape from the ink reservoir cover. Do not remove the foam on the
carriage.
6 Quick Start
Advertisement
Table of Contents
