Lenovo 3000 Y310 User Manual page 55

Lenovo 3000Y310 UG.book Page 47 Friday, September 14, 2007 4:24 PM
To install an SO-DIMM, do the following:
1. Touch a metal table or a grounded metal object. This action reduces any
2. Turn off the computer; then disconnect the ac adapter and all cables
3. Close the computer display, and turn the computer over.
4. Remove the battery.
5. Unfasten the five screws a on the cover and remove the cover b.
6. Find the notch on the contact edge side of the SO-DIMM.
Attention: To avoid damaging the SO-DIMM, do not touch its contact edge.
7. With the notched end of the SO-DIMM toward the contact edge side of
static electricity in your body, that could damage the SO-DIMM. Do not
touch the contact edge of the SO-DIMM.
from the computer.
the socket, insert the SO-DIMM into the socket at an angle of about
20 degrees, then press it in firmly a.
1
Replacing Memory
Chapter 5. Upgrading and Replacing Devices
47