Figure 5-9: Setup Wizard's Check The Router's Status Screen; Figure 5-10: Setup Wizard's Configure Cable Or Dhcp Settings Screen - Linksys WRT54GS User Manual

Wireless-G Broadband Router with SpeedBooster
10. Make sure the Router's Power, Internet, and numbered LEDs (depending on the number of PCs connected) are
lit on its front panel. After you have done so, click the Next button.
11. The Setup Wizard will automatically detect the Internet connection type you use: Cable or DHCP or DSL
(PPPoE). If the Setup Wizard cannot detect your Internet connection type, you will see the Advanced Internet
Settings screen, and you will be asked to select your Internet connection type: Static IP, PPTP, L2TP, or
Telstra. Proceed to the appropriate section for your Internet connection type.
Cable or DHCP
Host Name - Enter the Host Name if required by your ISP; otherwise, leave this field blank.
Domain Name - Enter the Domain Name if required by your ISP; otherwise, leave this field blank.
Click the Next button to continue or the Back button to return to the previous screen.
Chapter 5: Setting up the Wireless-G Broadband Router
Using the Setup Wizard
Figure 5-9: Setup Wizard's Check the Router's
Status Screen
Figure 5-10: Setup Wizard's Configure Cable or DHCP
Settings Screen
17