Chapter 3: Getting To Know The Wireless-G Broadband Router; The Back Panel; Figure 3-1: The Router's Back Panel - Linksys WRT54GS User Manual

Wireless-G Broadband Router with SpeedBooster
Chapter 3: Getting to Know the Wireless-G Broadband
Router

The Back Panel

The Router's ports, where the cables are connected, are located on the back panel.
Reset Button There are two ways to reset the Router's factory defaults. Either press the Reset Button, for
approximately five seconds, or restore the defaults from the Administration tab - Factory
Defaults in the Router's Web-based Utility.
Internet The Internet port is where you will connect your broadband Internet connection.
1, 2, 3, 4 These ports (1, 2, 3, 4) connect the Router to PCs on your wired network and other Ethernet
network devices.
Power The Power port is where you will connect the power adapter.

Chapter 3: Getting to Know the Wireless-G Broadband Router

The Back Panel

Figure 3-1: The Router's Back Panel

Important: Resetting the Router will erase all
of your settings (WEP Encryption, network
settings, etc.) and replace them with the
factory defaults. Do not reset the Router if you
want to retain these settings.
port: the connection point on a computer or networking
device used for plugging in cables or adapters
broadband: an always-on, fast Internet connection
6