Try Scanning - Canon CanoScan 4400F Quick Start Manual

Try Scanning
Try
Scanning
This section explains the basic scanning procedures using the image editing program, ArcSoft PhotoStudio,
and the scanner driver, ScanGear.
1
Place a document on the document glass and
close the document cover.
When opening the document cover,
support it with your hand until it stops.
2
Start ArcSoft PhotoStudio.
For Windows: Select [start] - [(All) Programs] -
[ArcSoft PhotoStudio 5.5], then click [PhotoStudio 5.5].
For Macintosh: Open [Applications] - [PhotoStudio]
folders, then double-click the [PhotoStudio] icon.
3
From the [File] menu, click [Select Source] and select the scanner model.
For Windows: Do not select the one that includes [WIA] in the model name.
4
Click the [Acquire] icon
I~l
to start ScanGear.
5
Select the type of document you are scanning in
[Select Source] and click [Preview].
6
Set [Destination] and/or [Output Size] as needed.
7
Click [Scan] to start scanning.
~}D.o not. touch the scanner while it is
~.
operatmg.
o
8
When prompted to close ScanGear, click [OK].
9
Save the scanned image in ArcSoft PhotoStudio and
close the window.
Scanning is completed. Select the aC~IOfi
yOll plefer
10
(~\ Retouch and save the Image
(Close ScanGear dialog)
(~~, SC<3f1 other images
[Do not do-;-e ScanGeaf)
[J
Do not
dlspla~,1
this dialog again
lou
m~~'
modify this setting on ISeem] lab of [Preference] dialog In ,ll,dvanced
mode
• For more information on scanning using ScanGear, bundled applications, and troubleshooting, see the on-screen
manual Scanning Guide. To open the Scanning Guide, double-click the Scanning Guide icon on the desktop, or click
on in ScanGear or CanoScan Toolbox.