Try Scanning - Canon CanoScan 8600F Quick Start Manual

Try
Scanning
Try
Scanning
This section explains the basic scanning procedures using the image editing program, ArcSoft PhotoStudio,
and the scanner driver, ScanGear.
1
Place a document on the document glass and
close the document cover.
Top
Bottom
2
Start ArcSoft PhotoStudio.
For Windows: Select [start] - [(All) Programs] -
[ArcSoft PhotoStudio 5.5], then click [PhotoStudio 5.5].
For Macintosh: Open [Applications] - [PhotoStudio]
folders, then double-click the [PhotoStudio] icon.
3
From the [File] menu, click [Select Source] and select the scanner model.
For Windows: Do not select the one that includes [WIA] in the model name.
Alignment
Mark
4
Click the [Acquire] icon to start ScanGear.
5
Select the type of document you are scanning in
[Select Source] and click [Preview].
6
Set [Destination] and/or [Output Size] as needed.
7
Click [Scan] to start scanning.
Scanning is completed. Select the action yOll prefer to
tG:) Retouch and save the image (Close ScanGear dialog)
8
When prompted to close ScanGear, click [OK].
9
Save the scanned image in ArcSoft PhotoStudio and
close the window.
() Scan other images
[] Do not display this dialog again
(Do not close ScanGear)
Yo,; mely modll}' this Sl~tting
01'"1
[Scarl:l tab
.,1
{Preference) dialog in.t:..dvanced
• For more information on scanning using ScanGear, bundled applications, and troubleshooting, see the on-screen
manual Scanning Guide. To open the Scanning Guide, double-click the Scanning Guide icon on the desktop, or click
on in ScanGear or CanoScan Toolbox.
..