Recording
Zooming
The angle of view can be adjusted using zoom.
Use the W end (wide angle end) to shoot a wider field of view.
●
Use the T end (telephoto end) to magnify the subject for shooting.
●
.
You can also use the slider's T/W zoom to zoom.
●
.
Memo:
You can expand the zoom area without degrading the image quality by
●
using dynamic zoom.
When digital zoom is used, the image becomes grainy as it is digitally
●
enlarged.
The zoom ratio range can be changed.
●
"ZOOM" (A P.109)
Capturing Still Images During Video Recording
Still images can be captured by pressing the SNAPSHOT button while in
the video mode (standby or recording).
.
"PHOTO" lights up on the screen when a still image is being captured.
●
.
The still images captured during video recording are saved to the desti-
●
nation set in media settings.
"REC MEDIA FOR IMAGE" (A P.135)
Memo:
The size of the still image that is captured in the video mode is 3200 x
●
1800.
Setting "SHUTTER MODE" to "CONTINUOUS SHOOTING" enables
●
you to take continuous shots of still images.
"SHUTTER MODE" (A P.111)
The picture quality varies with the "IMAGE QUALITY" setting.
●
"IMAGE QUALITY" (A P.115)
When an effect (black and white/sepia) is applied to the video, the
●
same effect will be applied to the still image.
"EFFECT" (A P.117)
30
Reducing Camera Shake
When DIS is turned on, camera shake during recording can be effectively
reduced.
.
The setting of DIS switches with every touch.
●
Display
X (Image stabilizer
Activates image stabilizer.
1)
Y (Image stabilizer
Reduces camera shake more effectively
2)
when shooting bright scenes on the wide an-
gle end.
*Only on the wide angle end (approx. 5x)
Z (OFF)
Deactivates image stabilizer.
Memo:
It is recommended to switch off this mode when using a tripod and re-
●
cording a subject with little movement.
Complete stabilization may not be possible if camera shake is exces-
●
sive.
This setting is effective for video recording only.
●
Checking the Captured Image Immediately
You can check the most recently captured images while in the recording
mode. (Quick Review)
.
Memo:
You can also delete the image after checking.
●
Quick Review can no longer recall the most recently captured image
●
once the power is turned off.
Use the playback mode to check the image in this case.
Still Image
●
"Checking the Captured Image Immediately(Still Image)" (A P.32)
Setting