Table of Contents
Advertisement
Removing the Card
Push the SD card inward once, then pull it out straight.
.
Types of Usable SD Card
The following SD cards can be used on this unit.
Operations are confirmed on the SD cards from the following manufactur-
ers.
Panasonic
●
TOSHIBA
●
SanDisk
●
ATP
●
SDHC Card
.
Use a Class 4 or higher compatible SDHC card (4 GB to 32 GB) for
●
video recording.
To record videos with "VIDEO QUALITY" set to "UXP", use of a Class 6
●
compliant SDHC card is recommended.
You can also use a Class 10 compliant SDHC card.
●
SD Card
.
This unit supports 256 MB to 2 GB SD cards.
●
Memo:
Using SD cards (including SDHC cards) other than those specified
●
above may result in recording failure or data loss.
Class 4 and Class 6 are guaranteed to have a minimum transfer rate of
●
4 MB/s and 6 MB/s respectively during reading or writing of data.
Clock Setting
The "SET DATE/TIME!" screen appears when you turn on this unit for the
first time after purchase, when it has not been used for a long time, or
when the clock is not set yet.
Set the clock before recording.
1
Open the LCD monitor.
.
This unit turns on.
●
When the LCD monitor is closed, this unit turns off.
●
2
Select "YES" and touch C.
.
3
Set the date and time.
.
Use the slider to adjust the year, month, day, hour, and minute in order.
●
Touch the operation buttons "E" / "F" to move the cursor.
●
After setting the date and time, touch C.
●
4
Select the region where you live and touch C.
.
The city name and time difference are displayed.
●
Touch C after the color of the selected region changes.
●
Memo:
The clock can be reset again later.
●
"Resetting the Clock" （A P.16）
When using this unit overseas, you can set it to the local time for re-
●
cording.
"Setting the Clock to Local Time when Traveling" （A P.26）
"SET DATE/TIME!" is displayed when you turn on this unit after it has
●
not been used for a prolonged period.
Charge this unit for more than 24 hours before setting the clock.
"Charging the Battery Pack" （A P.13）
You can turn on or off the clock display during playback mode.
●
"ON-SCREEN DISPLAY" （A P.120）
Touch the slider and buttons around the screen with your fingers.
●
The slider and buttons do not function if you touch them with your fin-
●
gernails or with gloves on.
The displays on the screen do not work even if you touch them.
●
Getting Started
15
Advertisement
Table of Contents
